Aragon Filters – For Rainwater and Tap Water

– Particles >2 microns……………99.999%
– Lead……………………………………99.95%
– Zinc, Cadmium…………………….100%
– Cesium……………………………….98%
– Chlorine………………………………100%
– Chloramines………………………..>90% +
– Pesticides……………………………97%
– Iron……………………………………..90%
– Aluminium……………………………97%
– Turbidity………………………………99%
– Oil Products…………………………90%
– Legionella……………………………99.99987%
– Salmonella Typhimurium……..99.998%
– Poliovirus…………………………….99.84%
– Rotavirus……………………………..99.99%
– Hepatitus A virus………………….96%
– Bacteria E.coli……………………..100%
– Pseudomonas aeruginosa……100%
– Colifag f-2……………………………100%
– Eterobacter cloaceae……………100%

See Bacteria, Viruses, and Parasites in Drinking Water

MECHANICAL FILTRATION

9″ x 2.5″, 10″ x 2.5″ – Capture particles greater than 0.5 micron.

10″ x 4.5″, 20″ x 4.5″ – Capture particles grater than 1 Microns.

A human hair is 70 microns.

ION-EXCHANGE FILTRATION

Aragon has ion exchange properties. Therefore, reduce hardness and inhibits scale growth (but it does NOT Soften the water).

HIGH POROSITY

Long polymer chains are formed in the production process, providing a porous yet mechanically strong structure. These polymer chains are coated and enable a highly effective ion exchange process.

HIGH PERFORMANCE

Aragon is a composite polymeric material presented as a single block, with a bacteriostatic silver addition, that makes it possible to get completely safe and healthy drinking water.  Is the only filter available that removes all harmful impurities with remarkable effectiveness.

Represents the most up to-date technology for Water Treatment whilst removing high percentages of heavy metals (on top of chlorine, taste, odor, pesticides, herbicides and VOCs) as well as Virus, Bacteria and Parasites.

High Filtration Capacity

– 9″ x 2.5″ Capable of filtering 30,000 litres in scheme water,  or 7,000 Litres at 0.3mg/l of iron at a flow rate of 3 lpm.

– 10″ x 2.5″ Capable of filtering 30,000 litres in scheme water,  or 7,000 Litres at 0.3mg/l of iron at a flow rate of 3 lpm.

– 10″ x 4.5″ Capable of filtering 150,000 litres in scheme water,  or 30,000 Litres at 0.3mg/l of iron at a flow rate of 25 lpm.

– 20″ x 4.5″ Capable of filtering 300,000 litres in scheme water,  or 60,000 Litres at 0.3mg/l of iron at a flow rate of 50 lpm.

• Whole House Filtration Installation Images
• Twin Undersink Installation Images

• Whole House Filtration System Installation Guide
• Twin Undersink Water Filter Installation Guide

For Whole House Filtration

• Operating Temperature: 2°C – 52°C
• Connection Type: 1″ or 3/4″ Ports
• Operating Pressure: 90 psi (320 kPa)
• Flow Rate: 50-60 LPM

• For Cold water use only. Install on COLD water lines only.
• Never install or operate where inlet water pressure may exceed 90 psi (620 kPa)
• Protect from freezing. Remove filter if temperature drop below 1°C.

For Undersink Water Filters

• Operating Temperature: 0.6 °C – 38 °C
• Operating Pressure: 75 psi (520 kPa)
• Flow rate: 3-4 LPM
• NSF certified: Yes
• For Cold water use only. Install on COLD water lines only.

– Certified by Institut Pasteur de Lille (France)
– Certified by S.M Kirov Military Medical Academy (Russia)
– Certified by The Research Institute of Influenza (Russia)
– Certified by V.G Khlopin Radium Institute (Russia)
– Certified by The Research Institute of Epidemiology and Microbiology (Russia)
– Certifued by IFTS (France)
– Certified by IAPMO (United States)
– Certified by University of Ferrara (Italy)