Vanity Inline Water Filter System
- Filters a the cold water coming from your bathroom tap.
- Connects to the bathroom tap, no separate tap required.
- It simply connects inline between the cold water isolation tap and the kitchen mixer tap.
- Works at a flow rate of 7LPM.
Dimensions:
- System Dimensions: 225 W x 460 H x 225 D mm
- Filter Dimensions: 79 O.D x 71 I.D x 323 L mm
Specifications
- Flow Rate: 6.3 lpm
- Connection Type: Connects to 1/2″ Cold Water Line
- Operating Temperature: 4°C to 37°C
- Maximum Operating Pressure: 125 psig
- Minimum Working Pressure: 40 psig
- Carbon Type: Activated Carbon (Not designed to remove bacteria or viruses)
- Warranty: 5 Years
General Installation/Operation/Maintenance Requirements
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
after the system. Activated carbon block filters are not designed to remove bacteria or viruses. - Actual performance results may vary based on the level of organic contaminants in the influent water, changes in
pH and upon other conditions that may be encountered during actual use. - Use in cold water applications only.
- Flush 5 gallons through cartridge prior to use.
- Replace cartridge when rated capacity is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations
Downloads and Links
Replacement Filters
Certifications
- 📎 NSF 42, 53
- 📎 WQA
- 📎 WaterMark